Skip to content

How to compute your GWA, with examples

Your general weighted average, or GWA, is an average that counts bigger subjects more. Here’s the formula, a worked example, and what to check before you trust the number.

Aral.ai team5 min read
On this page

Your GWA isn’t a plain average of your grades. A 5-unit subject should matter more than a 1-unit one, so each grade is weighted by its units. The maths is simple once you see it laid out.

The formula

For each subject, multiply the grade by the number of units. Add up those results, then divide by the total units:

GWA = (sum of grade × units) ÷ (sum of units)

Only count subjects that are part of your GWA. Many schools leave out non-credit subjects or ones graded pass/fail, so check your student handbook.

A worked example

Say you took four subjects in a semester, using the common 1.0 to 5.0 scale:

Four subjects with units, grades and the grade multiplied by units
SubjectUnitsGradeGrade × units
Mathematics31.755.25
English32.006.00
Physical education21.252.50
Chemistry42.5010.00
Total1223.75

Now divide: 23.75 ÷ 12 = 1.979, which rounds to 1.98.

Notice that the plain average of the four grades would be 1.875. The weighted answer is higher (worse on this scale) because your heaviest subject, Chemistry, had your weakest grade. That’s the whole point of weighting.

If your school uses another scale

Schools in the Philippines use different systems, so check yours before comparing numbers with a friend:

  • 1.0 to 5.0 scales. Common in many universities. Lower is better, 1.0 is the highest and 5.0 is failing. The passing grade varies by school, so look it up in your handbook.
  • 4.0 scales (GPA). Higher is better. The formula is the same: multiply by units, add, divide by total units.
  • Percentage grades. Common in basic education and some colleges. Same weighted formula; the result is a weighted average percentage.

Honours, scholarships and retention policies are tied to specific cut-offs that differ by school. This article can’t tell you yours; your registrar or handbook can.

Common mistakes

  • Averaging grades without units. That treats a 1-unit subject like a 5-unit one.
  • Counting subjects your school excludes. For example, non-credit or pass/fail subjects.
  • Mixing scales. Don’t add a percentage grade to a 1.0 to 5.0 grade. Convert only with your school’s official table.
  • Rounding too early. Keep full decimals until the end and round the final answer.
  • Forgetting the semester and cumulative difference. A semester GWA covers one term. A cumulative GWA covers all terms, using the same formula over all subjects.

Using a calculator

Once you have more than a few subjects, doing this by hand gets tedious. Aral.ai has a free grade calculator under Tools: add your classes with their units and grades, choose a scale (1.0 to 5.0, 4.0 or percentage), and see your GWA update. You can also set a target for a class and see what you need to reach it.

The calculator uses the standard weighted formula above. Check that the scale and the subjects it counts match your school’s policy.

Open the grade calculator

Keep reading

All posts
Study guides7 min read

How to plan your review for an exam in two weeks

Count back from exam day, split topics across your days, practise early and keep the last two days light. A realistic plan you can adjust.

Study guides5 min read

The Pomodoro technique for students, without the burnout

How to use 25-minute focus sessions to start studying and keep going, what to do on breaks, and when to change the numbers.

Study guides5 min read

How to turn a YouTube lecture into notes you can review

Watch a lecture once, then make it stick: pause points, notes in your own words, questions for every section and a quick review the next day.